Single Fret Length Bender
Closely spaced roller pitch
In addition to bending stock-length fretwire, the tools key feature is its ability to accurately bend individual frets.
Its robust stainless steel construction and closely spaced bending rollers make this possible.
"The fret bender I bought from you is great - a real game changer for my fret work". J.C., Hampshire UK.
"What a superbly built bender!. I will be buying more of your outstanding tools! Thanks!". A. L. , Gloucestershire UK
Technical Description

Smaller lead-in length
The rollers’ close spacing minimises lead-in length, allowing the bend radius to begin at the end of the fret. This creates a consistent, uniform radius along the full length of each fret.

Vice mounting block
The tool features a removable rear mounting block, allowing it to be secured in a vice horizontally, vertically, or at an angle to suit your working requirements.

Dual feed wheel
The dual groove feed wheel is designed to provide control of the feed while catering for different tang widths.
Its construction allows slight flex at the circumference, helping to grip the barbs securely.
The nominal groove widths are 0.7mm and 0.9mm and will cover the majority of fret sizes although some fretwires may fall outside this range.
As the feed wheel is turned, pressure is applied to the bending rollers via the top thumb screw in order to achieve the required radius.

Permanent straightening wheels
The straightening wheels comprise of a separate dual wheel and unbending roller.
The straightening wheels are fixed permanently on the tool in a position that doesn't interfere with bending. This avoids removal and replacement of rollers between bending and unbending.

Consistent fret radius
Q. "What radii can it be set up for and how?"
A. As there are numerous fret wire options with respect to gauge and material composition, it is not possible to 'dial up' a previous setting - e.g. small differences in cross section of the crown and barbs will cause the radii to differ between similar gauges. Once the radius has been setup for a particular fret wire type, the tool will maintain this for consistent fret bending.