Fret End Bevelling Tool with Adjustable File Angle


Fret end bevel file with adjusatble file depth and angle dressing the fret ends on a guitar neck

Handcrafted oak body

The bevel file body is hand finished from durable oak.

Rotatable file

The tool features a rotatable file, mounted in a thermoplastic bar, enabling fret bevel angles from 0° to 35°, to be produced.



Technical Description


Underside radius

The underside of the body features a nominal 9.5" machined radius, that allows the tool to be used over both radiused and flat boards without wobbling, ensuring a consistent fret bevel angle along the edge of the neck.

Burr clearance and debris

The cylindrical holder and file intersection create a natural clearance directly above the fret end, allowing burrs and filings to pass through without building up on the tool or tearing the thermoplastic plastic bar.

Variable angle

A graduated plate at one end indicates angular position in 5-degree increments.

A flush-ground pin provides a reference for setting the angle. The illustration shows the file angle set to 30°.

The variable angle feature is valuable on necks where the strings closely approach the fret ends, allowing for a steeper bevel angle to prevent string roll-off.

Recommended bevelling method

File the fret ends flush using a steep angle or the file set perpendicular.

Then adjust to 20-25 degrees for a secondary cut.

A final dress at the desired angle can then be made.

After each use, brush away any filings from the file and holder.

Adjustable depth

The file protrusion is adjustable from 2.5 mm to 5.5 mm, ensuring even wear distribution.

It can also be flipped or reversed to provide four cutting edges, extending its life.

 

File detail

The file grade is 2nd cut smooth, suitable for alloy and stainless steel frets. One edge is safe, while the opposite edge has file teeth, allowing for alternative uses.

The nominal file dimensions are 135mm (5.25") long x 15mm wide x 4.2mm thick.